prototype

　mold design

mold making

PET( Polyethylene Terephtalate) data sheet

--------------------------------------------------------------------------------
LEGEND
A = amorphous - Cr = crystalline - C = clear - E = excellent - G = good - P = poor
O = opaque - T = translucent- R = Rockwell - S = Shore
--------------------------------------------------------------------------------

STRUCTURE: Cr

SPECIFIC DENSITY: 1.37

WATER ABSORBTION RATE (%): 0.15

ELONGATION (%): 70

TENSILE STRENGTH (psi): 6600

COMPRESSION STRENGTH (psi): 14000

FLEXURAL STRENGTH (psi): 16000

FLEXURAL MODULUS (psi): 400000

IMPACT (IZOD ft. lbs/in): 0.8

HARDNESS: R120

FABRICATION
- BONDING: G
- ULTRASONIC WELDING: G
- MACHINING: E

DEFLECTION TEMPERATURE (deg. F)
- @ 66 psi: 330
- @ 264 psi: 212

UTILZATION TEMPERATURE (deg. F)
- min: -4
- max: 212

MELTING POINT (deg. F): 480

COEFFICIENT OF EXPANSION: 0.000039

ARC RESISTANCE: 80

DIELECTRIC STRENGTH (kV/mm): 20

TRANSPARENCY:

UV RESISTANCE: G

CHEMICAL RESISTANCE
- ACIDS: G
- ALKALIS: G
- SOLVENTS: G